CCGW 120408 CVD-D
Wiper
- Order number: DP2010-0040
Technical details:
| Cutting material: | CVD-D |
| ISO-Basic shape: | C (80°) |
| Clearance angle: | C (7°) |
| Tolerance: | G |
| Insert type: | W |
| Insert size: | 12 |
| Insert thickness: | 04 (4,76 mm) |
| Radius: | 08 r=0,8 |
| Radius tolerance: | ± 0,015 mm |
| Wiper: | Yes |
| Teeth-count: | 1-edge-tipped |
| Cutting edge length SKL: | 3,00 mm |
| Cutting edge version: | edge-tipped |
| Application area: | Turning |
Application range:
- Titanium
- Copper
- Magnesium
- Brass
- Brass lead free
- Tungsten alloy
- Acrylic (PMMA)
- CFRP
- GRP
- Glass
- Glass ceramic
- Carbide >10%Co
- Ceramics
- Plastics
- Copper alloy
- MMC
- Gold
- Silver
- Platinum
- Zircon
- Aluminum >10% Si
What is a Wiper insert?
Our wiper inserts have a trailing edge at the radius outlet.
Advantages of using wiper geometry:
- Improvement of the surface finish
With the same feed rate, you achieve 2-4 times better surface quality with our wiper geometry. - Reduction of the cycle time
With the same surface quality, the feed rate can be increased by 2-4 times, thus reducing the machining time.
Hint:
To use the Wiper-Edge in the best possible way, the following angles of attack on the machine must be considered:
| C-Insert | 95° |
| D-Insert | 93° |
| T-Insert | 91° |
| W-Insert | 95° |
