CCGW 09T302 CBN-X95
Please sign in to see prices
- Order number: TI5910-0208
What is a Wiper insert? Our wiper inserts have a trailing edge at the radius...more
Product information "CCGW 09T302 CBN-X95"
What is a Wiper insert?
Our wiper inserts have a trailing edge at the radius outlet.
Advantages of using wiper geometry:
- Improvement of the surface finish
With the same feed rate, you achieve 2-4 times better surface quality with our wiper geometry. - Reduction of the cycle time
With the same surface quality, the feed rate can be increased by 2-4 times, thus reducing the machining time.
Hint:
To use the Wiper-Edge in the best possible way, the following angles of attack on the machine must be considered:
| C-Insert | 95° |
| D-Insert | 93° |
| T-Insert | 91° |
| W-Insert | 95° |
| Cutting material: | CBN |
| CBN grade: | X95 |
| ISO-Basic shape: | C (80°) |
| Clearance angle: | C (7°) |
| Tolerance: | G |
| Insert type: | W |
| Insert size: | 09 |
| Insert thickness: | T3 (3,97 mm) |
| Radius: | 02 r=0,2 |
| Radius tolerance: | ± 0,015 mm |
| Wiper: | Yes |
| Teeth-count: | 2-edge-tipped |
| Cutting edge length SKL: | 3,00 mm |
| Cutting condition: | Heavily interrupted cut, Slightly interrupted cut |
| Cutting edge version: | edge-tipped |
| Application area: | Turning |
| Application range: | Carbide >20% Co, Cold work steel, hardened to 72 HRC, Hot work tool steel, hardened to 72 HRC, HSS, Special alloys such as, ASP, CPM, Hardox S390 up to 72 HRC, Stainless steel, hardened, Stellite, Tool steel, hardened up to 72 HRC |
Related links to "CCGW 09T302 CBN-X95"
